Daylight and Sunlight

DAYLIGHT & SUNLIGHT ASSESSMENTS

Keeping Blue carries out daylight and sunlight assessments for planning applications in London, Reading and other built-up areas. We assess both the effect of a proposed development on neighbouring homes and the quality of light within the new accommodation, following BRE 209 (2022), Site layout planning for daylight and sunlight, and BS EN 17037. Reports are prepared for architects, developers, planning consultants and homeowners, in the form planning officers expect.

Daylight and Sunlight Assessment (to Neighbouring Properties)

Development in built-up areas often requires an assessment of how new building work affects the light received by neighbouring homes. We model the site and its surroundings in 3D and test the windows of neighbouring residential properties against the BRE numerical guidelines such as: Vertical Sky Component (VSC), and annual and winter probable sunlight hours (APSH) for windows facing within 90° of due south. A window is generally considered unaffected if it keeps a VSC of at least 27%, or if the proposal leaves it with at least 0.8 times its former value. The BRE targets are guidance rather than rules, and the NPPF encourages a flexible approach to applying them, so we report results against the targets and set them in the context of the site. In London, Policy D6 of the London Plan also applies. Where a neighbouring window sits unusually close to the boundary, we can test against alternative “mirror-image” targets. For schemes with hundreds of neighbouring windows we developed our own VSC code, which lets design options be tested quickly (see VSC tool page). Rights of light are a separate legal matter and are not covered by a planning daylight and sunlight report.

Daylight Factor Analysis (within New Dwellings)

New-build flats and residential conversions usually require an assessment of internal daylight in habitable rooms. Since the 2022 edition of BRE 209, this follows BS EN 17037 and its UK National Annex, using either the daylight factor method or the illuminance method (climate-based modelling) against recommended targets for bedrooms, living rooms and kitchens. We also test direct sunlight to proposed living spaces against the standard’s recommended minimum of 1.5 hours. If you are planning an extension or refurbishment, your local planning authority may ask for calculations to show acceptable internal daylight levels. We provide a report for the planning authority and/or Building Control to discharge conditions on your planning application. Where a project is pursuing BREEAM, we also carry out the daylighting assessment for the relevant credits.

Sun on Ground & Overshadowing Assessments

New development can overshadow neighbouring gardens and other amenity spaces, as well as the amenity space of the development itself. BRE guidance recommends that at least half of an amenity area receives two hours of direct sunlight on 21 March. Where an existing space already falls short, the area receiving sun should not be reduced to less than 0.8 times its former value. We carry out sun-on-ground assessments and produce shadow diagrams comparing existing and proposed conditions, typically on 21 March, with other dates where the planning authority requires them.